Hello,

I have a B410P card with the new elastix 1.5 stable, and I can't get the the card to work,
I'm from Portugal, and the card is connected, the ports that are connected to the ISDN outside
line are steady GREEN an the others that are disconnected, are blinking RED, as far as I
know that is normal, in the Hardware detection the card is detected and shows as follow:

Span # 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
1
Not in Use

2
Not in Use

3
Not in Use
Span # 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS RED
4
Not in Use

5
Not in Use

6
Not in Use
Span # 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/CCS RED
7
Not in Use

8
Not in Use

9
Not in Use
Span # 4: B4/0/4 "B4XXP (PCI) Card 0 Span 4" AMI/CCS
10
Not in Use

11
Not in Use

12
Not in Use

I have the default Zap TRUNK that comes with elastix, and when I try to make a call
it shows:

---------------------------------------------------------------------------------------

Executing [s@macro-outbound-callerid:11] MacroExit("SIP/1001-085d74b0", "") in new stack
-- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/1001-085d74b0", "0|AGI|fixlocalprefix") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/1001-085d74b0", "OUTNUM=225103843") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/1001-085d74b0", "custom=DAHDI/g0") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/1001-085d74b0", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/1001-085d74b0", "dialout-trunk-predial-hook|") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/1001-085d74b0", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/1001-085d74b0", "0?bypass|1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/1001-085d74b0", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/1001-085d74b0", "DAHDI/g0/225103843|300|") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk:20] Goto("SIP/1001-085d74b0", "s-CHANUNAVAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/1001-085d74b0", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/1001-085d74b0", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 66) - failing through to other trunks") in new stack

As far as I know zaptel is now dahdi, the configuration is the one that came by default,
Am I missing something?

In the Flash pannel appear 8 DANDI trunks, If anyone need more information please tell me
I'm quite desperate.


Thanks in advance.